Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Start Card of a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Key

In this video, see that the owner of a Renault Megane has lost a key and can no longer start the car. To proceed with the reprogramming, you need blank cards that have never been programmed before, and a laptop with Windows XP or Vista and the Renolink software (provided on CD) installed correctly, which can also be found online, for example, on AliExpress, but it is advisable to check carefully that it is suitable for your vehicle. You will also need a USB cable on one end and OBD on the other to connect the computer to the car. Start the program. Insert the first key into the designated slot in the car. The software guides you through the procedure. You can repeat the process up to a maximum of 4 keys. In the video, they tried to program 4 keys, but only 2 worked, as the vehicle probably already had two coded keys: the two new ones took the places left vacant by the lost ones, allowing the programming of only 2 functioning keys.

Posted on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

What to do if the Renault Megane does not recognise the card
What to do if the Renault Megane does not recognise the card
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you will see a small trick to adopt if your Renault Megane does not recognise the card needed to start the vehicle. Unfortunately, thi…
How to programme the card of the Renault Megane 2?
How to programme the card of the Renault Megane 2?
Renault Megane (2002-2010 / Megane 2) The procedure to programme the card of the Renault Megane 2 via OBD is similar to that used for other vehicles in the Renault group. From the appropr…
How to Replace the Starter Motor on a Renault Megane
How to Replace the Starter Motor on a Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Today we will go through the instructions that will allow us to remove and replace the starter motor on a Renault Megane. First, let's open the bonne…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos