Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Warning light – error code

In the Renault Clio, after completing all scheduled maintenance tasks, you need to manually reset the corresponding warning light. Follow these steps in this tutorial. First, with the instrument cluster switched on, scroll through the various display screens using the directional arrows located at the end of the right stalk. Once you reach the maintenance screen, press and hold the up arrow button. At this point, maintain the pressure until you see the service interval reset, and verify that the procedure was successful by restarting the instrument cluster.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this tutorial, you will see how to reset the service on a Renault Clio, a very simple and quick operation to perform only after completing all sch…
Renault Clio (2019-2026 / Clio V, Clio 5) In this tutorial, you will see how to reset the service light in the Renault Clio, a very simple and quick operation that should only be performed af…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, learn how to reset the service light for routine maintenance oil change on a third series Renault Clio. First, get inside the…

    Frequently Asked Questions

    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2019-2026 - What are the warning lights on the dashboard of the Clio 5? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer
    • Clio 2012-2019 - How can I retrieve the unlock code of the car radio of my Renault Clio? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos