Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Master?

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

To reset the service light, turn on the ignition and press the button at the end of the lever until the service interval appears on the display. Once here, hold down the same button for at least 5 seconds to display the remaining kilometres until the next service.

Release the button and press it again for at least another 10 seconds until the service interval is reset. The service light reset procedure should be performed every time a service is carried out to know exactly when the next one is due.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Master
How to Reset the Service Light on a Renault Master
Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master vehicle, follow these steps: Start the car and ensure the display shows the total mileage. Press and h…
How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2010-2023 / MK 3) After performing the routine service required by the Renault Master, it is necessary to reset the service light, usually orange and shaped like a spa…
How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2010-2023 / MK 3) By following these brief steps, you will reset the service light for the routine maintenance oil change on the Renault Master. First, get inside the …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos