Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Master?

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Renault Master, turn the key in the ignition switch to power up the instrument panel. Once the panel is lit, navigate through the menu using the buttons located at the end of the right-hand steering lever.

When the display shows the mileage until the next service, press and hold the upward arrow button until the reset is complete; after resetting, you can turn off and then turn on the panel to confirm.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2010-2023 / MK 3) After performing the routine service required by the Renault Master, it is necessary to reset the service light, usually orange and shaped like a spa…
How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2024-2026 / MK 4, XDD) Resetting the service light on the Renault Master is a straightforward task that can be done independently, aided by our short video tutorial. To res…
How to Reset the Service Light on the Renault Master?
How to Reset the Service Light on the Renault Master?
Renault Master (1997-2010 / MK 2) To reset the Service light on the Renault Master, turn on the ignition by inserting the key into the ignition switch and turning it: once the dashboa…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos