Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Rear Headlamp Bulb on the Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Tail light bulb

If you need to replace the rear headlamp bulb on this car model, the following description provides the instructions and various steps for the replacement, and you can also refer to the images in the video. First, lift the tailgate and then proceed to remove the cover clips for the fixing screws located on the inner side of the headlamp. Use a screwdriver to remove the two screws, allowing you to pull the headlamp unit towards you. Behind the unit, you will find the bulb holders that can be removed by first disconnecting the electrical connector and then unscrewing the individual bulb.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Captur
How to replace the rear headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the rear headlight bulb of the Renault Captur, we need to open the trunk of the car and then remove the tailgate. After removing the tailg…
How to replace the rear light bulb on the Renault Captur?
How to replace the rear light bulb on the Renault Captur?
Renault Captur (2019-2026 / MK 2) Replacing the rear light bulb on a Renault Captur is a straightforward task. First, open the boot and then unscrew the two side screws of the light u…
How to replace the rear headlight bulb of the 2017 Renault Captur
How to replace the rear headlight bulb of the 2017 Renault Captur
Renault Captur (2013-2019 / MK 1) Replacing the rear headlight bulb on a 2017 Renault Captur car is a simple and quick operation that can be done independently. To replace the bulb, w…

How to Access the Spare Wheel of the Fiat Doblo

The Fiat Doblo comes with the spare wheel located on the underside of the vehicle. This guide explains how to access the spare wheel in case you need to use it. To access the spare wheel, open the boot of the vehicle and insert the metal tube into the designated hole near the lock. Using a torque wrench, turn the tube/key until you feel the release of the wheel from the ground, disconnect the wire, and take the wheel to place it in the housing. To facilitate removal, lift the vehicle with a jack.

Watch the video!


by ScegliAuto

More videos