Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb on the Renault Captur?

Model: Renault Captur MK 2 - Years 2019-2026
Part: Tail light bulb

Replacing the rear light bulb on a Renault Captur is a straightforward task. First, open the boot and then unscrew the two side screws of the light unit. Once the screws are removed, gently pull out the light and disconnect the connector. Next, open the light housing and remove the bulb. Insert the new bulb, close the light housing, and reconnect the connector. Refit the light unit, screw in the screws, close the boot, start the vehicle, and test the bulb's operation.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Captur
How to replace the rear headlight bulb of the Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the rear headlight bulb of the Renault Captur, we need to open the trunk of the car and then remove the tailgate. After removing the tailg…
How to disassemble the rear headlight of the Renault Captur
How to disassemble the rear headlight of the Renault Captur
Renault Captur (2013-2019 / MK 1) If you own a Renault Captur and want to find out how to quickly and safely remove the rear light, all you have to do is read the following guide and …
Replacement of the rear headlight bulbs of the Renault Captur
Replacement of the rear headlight bulbs of the Renault Captur
Renault Captur (2013-2019 / MK 1) Below we will see the procedure that will allow us to disassemble and replace the bulbs of the rear headlight of the Renault Captur. First, we open t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos