Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper Blade

Model: Renault Scenic - Years 1996-2003
Part: Windshield wipers

Replacing the rear wiper blade is extremely simple, but it is important to note that this is not a generic blade but a dedicated model, so pay attention when purchasing it, as it is also available in the aftermarket; once you are sure you have the correct blade, lift the wiper arm and detach the original blade by pulling it downwards; insert and align the new blade onto the support hook and press until it fits perfectly; operate the wiper to ensure it functions correctly.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Wiper Blade on a Renault Scenic
How to Change the Rear Wiper Blade on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see how to change the rear wiper blade on a Renault Scenic. This is a very simple task to do yourself. Grip the rear wiper arm, gently pull it …
How to Replace the Rear Windscreen Wiper Blades
How to Replace the Rear Windscreen Wiper Blades
Renault Scenic (2003-2009 / MK 2, Scenic 2) Go to the back of the car and lift the rear wiper arm to disengage the wiper blade from its housing on the arm. Once the wiper arm is raised, pull th…
Windscreen Wiper Blade Replacement
Windscreen Wiper Blade Replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the wiper blades is very simple and requires no special tools; it is important that the blades are always efficient and capable of perfectl…

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos