Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open the engine hood of the Renault Clio Mk2?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Body

The guide shows the procedure for opening the hood of the engine compartment of the Renault Clio Mk2. The procedure is very simple and does not require any special tools to be performed. On the edge of the left front shoe compartment, there is a small lever that, when activated, unlocks the first latch of the engine compartment hood. At this point, it is possible to complete the opening from the front of the vehicle. On the right side of the logo of the French car manufacturer, in the small gap that is created, there is the lever of the lock. When activated, it is possible to lift the hood and lock it in position with the safety rod. Closing the compartment is simply done by closing the hood into position.

Posted on 3 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to open the engine hood in the Renault Clio?
How to open the engine hood in the Renault Clio?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) In this tutorial, we can see how to open the engine hood in the Renault Clio 4, an extremely simple operation that is not different from the standard…
How to Open the Bonnet of the Renault Clio V
How to Open the Bonnet of the Renault Clio V
Renault Clio (2019-2026 / Clio V, Clio 5) To open the bonnet of the Renault Clio model 5 produced from 2019 to present, pull the bonnet release lever located next to the pedal box. Once the l…
How to open the engine hood of the Renault Clio
How to open the engine hood of the Renault Clio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Today's video will show us how to open the hood of the Renault Clio, in simple and quick steps. First, we open the front door and start pulling the p…

How to Install Universal Roof Bars on a Renault Clio

Install universal roof bars on a Renault Clio. Universal roof bars are used on cars with roof rails (fixed bar secured to the roof of the car) and without. Fit the bar kit (as shown in the video) with the bars adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once you have adjusted the width of the anchoring brackets (measure with a tape measure), tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, fit the safety caps on both sides.

Watch the video!


by ScegliAuto

More videos