Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Filter Located in the Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fuel filter

In this video, we can see where the fuel filter is located in the Renault Clio, useful in case you need to replace it. As shown, it is positioned at the lower area of the vehicle, just behind the fuel tank on the right side. To access it and then remove it, first lift the car, taking all necessary safety precautions. Once done, disconnect the fuel hoses using two flathead screwdrivers, unlock the two retaining clips, and extract the filter from its housing. To fit the replacement, simply follow the reverse procedure.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on the Renault Clio 2 1.2 Petrol
How to Replace the Fuel Filter on the Renault Clio 2 1.2 Petrol
Renault Clio (1998-2005 / Clio 2, MK 2) Let’s discover the steps to remove and replace the fuel filter on the second series Renault Clio, following the instructions below. First, lift the v…
Simple way to remove the fuel pump on a Renault Clio IV.
Simple way to remove the fuel pump on a Renault Clio IV.
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, we can see a simple - albeit rather approximate - way to change the fuel pump on the Renault Clio IV. We need to remove the rear seat,…
Where is the Cabin Filter Located on a Renault Clio and How to Replace It?
Where is the Cabin Filter Located on a Renault Clio and How to Replace It?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, see where the air filter is located in the Renault Clio 4 and how to replace it if necessary. As shown, it is located inside the box o…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos