Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio in the Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, see how to replace the car radio in the Renault Clio, a very simple and quick operation. For this, you will need two of the special keys shown in the video, which are easily available online.

First, ensure the vehicle is off, then insert both keys into the holes on the sides of the radio to unlock the internal clips. Once done, push the keys outwards, pull towards you, and extract the entire unit from its housing.

Now, disconnect the various connectors and install the replacement if necessary.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to enter the radio code on a Renault Clio 4?
How to enter the radio code on a Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In the Renault Clio 4, the radio code is entered using the keypad on the left side of the radio. Buttons 1 to 4 are used to input the four digits of …
How to Remove the Car Radio from a Renault Clio
How to Remove the Car Radio from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you can start, sit in the driver's seat of your Renault Clio. Begin by fully inserting the extraction keys into the holes on the front face of…
How do you remove the car radio in the Renault Clio 4?
How do you remove the car radio in the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) More and more often, there is a desire among owners of an older car to purchase a technologically up-to-date aftermarket car radio and replace the fa…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos