Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulbs of the Air Conditioning Controls of the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Interior dome light bulb

Today's guide will show you how to remove and replace the bulbs of the air conditioning controls of the Renault Clio, following the instructions below. First, get in the car and start by removing the radio, then remove the plastic cover of the air conditioning controls; unscrew the fixing screws found on the sides to remove them, as shown in the video. At this point, disconnect the electrical connectors and remove the small bulb-type bulbs by pulling the heating knobs; check their operation and reassemble everything!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Heating Control Bulbs on the Renault Clio
Replacing the Heating Control Bulbs on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Here are brief instructions on how to remove and replace the bulbs for the heating or air conditioning controls on the Renault Clio. First, get in th…
How to Remove the Climate Control Buttons of the Renault Clio
How to Remove the Climate Control Buttons of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide explains the procedure for removing and replacing the climate control buttons of the Renault Clio. First, get inside the vehicle and start…
How to Change the Bulbs of the Heating Controls of the Renault Clio
How to Change the Bulbs of the Heating Controls of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, we will discover the procedure that will allow us to remove and replace the bulb-type bulbs of the heating and air conditioning controls of th…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos