Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Brake Pads and Discs on a Renault Kangoo

Model: Renault Kangoo KW, MK 1, KC - Years 1997-2008
Part: Brake pads

Replacing the front brake discs and pads is maintenance that can easily be done yourself; therefore, lift the vehicle and secure it on proper axle stands, avoiding leaving it raised on a jack. Next, remove the front wheel, then the retaining pins of the brake caliper to remove it and extract the old pads. Also, remove the caliper bracket, then remove the retaining pins of the disc from the hub and take it off. At this point, brush the disc seat on the hub to remove any oxidation and apply grease to prevent further formation. Fit and secure the new disc, cleaning it of protective oil with the appropriate cleaner. Then, work in reverse to reassemble the caliper bracket, new pads, and then the caliper.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the front brake pads on the Renault Kangoo II
How to change the front brake pads on the Renault Kangoo II
Renault Kangoo (2007-2021 / FW, FC, MK 2) Let's see how to change the front brake pads on a Renault Kangoo II: we start by opening the hood and removing the cap from the brake fluid reservoir…
When to Replace Brake Discs and Pads
When to Replace Brake Discs and Pads
Renault Kangoo (1997-2008 / KW, MK 1, KC) This video tutorial provides some advice on when it is necessary to replace the brake disc and pads. The vehicle in question is a Renault Kangoo. The…
How to replace the front brake pads on the Renault Kangoo?
How to replace the front brake pads on the Renault Kangoo?
Renault Kangoo (1997-2008 / KW, MK 1, KC) In this tutorial, we can see how to replace the front brake pads in the Renault Kangoo, a very simple operation but one that requires good manual dex…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos