Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter on the Renault Trafic 2

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Diesel fuel filter

The steps to replace the diesel filter of the Renault Trafic model 2 are not very complex to do independently. Let's start by dismantling the filter by opening the front hood and using a flathead screwdriver to move the filter support lever, then push the two green parts on the tube to release the filter. Disconnect the connector and then remove the filter from its housing. To insert the new filter, you will need to follow the steps in reverse, so insert the filter and connect it to the connector. Insert the tubes and lower the two parts, then finally adjust the lever on the filter.

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Renault Trafic diesel filter
How to replace the Renault Trafic diesel filter
Renault Trafic (2001-2014 / MK 2) To replace the diesel filter on the Renault Trafic, open the bonnet and find the diesel filter behind the headlight on the passenger side (behind the…
How to change the diesel filter on Trafic
How to change the diesel filter on Trafic
Renault Trafic (2001-2014 / MK 2) Do we want to replace the diesel filter? We see the disassembly of the diesel filter from inside the engine compartment of the Renault Trafic. We lif…
How to change the diesel filter of the Renault Trafic
How to change the diesel filter of the Renault Trafic
Renault Trafic (2014-2026 / MK 3) In this video, we will see how to change the diesel filter of the Renault Trafic: we open the hood and equip ourselves with a T30 hex key; the filter…

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos