Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

DIY installation of additional tailpipes on the Roewe RX5 [WORLD]

Model: Roewe Rx5 MK 1 - Years 2016-2023
Part: Exhaust muffler

If we want to improve the aesthetic appearance of the car by installing additional terminals on the exhausts, we can purchase a kit of accessories and follow the instructions given in the video and also in this description. First you need to take a cutter to engrave and cut the plastic in the lower part of the bumper where we will then house the additional terminal. Then take one of the two terminals, widen the fixing hooks and insert it on the car's exhaust, refine the cut on the plastic that we made to size and position the terminal definitively by first cutting the downward-oriented curve of the terminal with a grinding wheel standard, then tighten the fixing screws. Repeat the same operations to install the other terminal.

Posted on 31 December 2022 by ScegliAuto

Video tutorial

Related tutorials

Installation of rear steel silencers on a Roewe RX5
Installation of rear steel silencers on a Roewe RX5
Roewe Rx5 (2019-2026 / ) How to install the steel finished rear silencers on the Roewe RX5. Our Youtuber bought them from an e-commerce platform. There are both black (35.90 …
How to reset the tire pressure warning light on the MG RX5 - Roewe RX5
How to reset the tire pressure warning light on the MG RX5 - Roewe RX5
Roewe Rx5 (2019-2026 / ) In this guide, let's see the main steps that will allow us to reset the tire pressure warning light on the Roewe RX5 and MG RX5; before carrying out …
How to recharge the battery of the Roewe Rx5
How to recharge the battery of the Roewe Rx5
Roewe Rx5 (2019-2026 / ) In this video tutorial we will see how to recharge the battery of the Roewe Rx5, following these simple and quick steps. First of all, let's place th…

How to Remove the Door Panel on Nissan Micra

How do you remove the door panel (right side) on a Nissan Micra? Use a lever or screwdriver to pry at the handle on the door panel, detach it, and disconnect the terminals of the window switch (manual crank). Use a fixed screwdriver to unscrew the screws on the panel, then use a plastic lever to unclip all the clips around the perimeter of the door. Finally, pull away the panel with your hands, disconnecting the opening lever cable, the window lifter terminals, and the speakers. Reassemble everything by reversing the steps.

Watch the video!


by ScegliAuto

More videos