Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Air Filter on a Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Air filter

To remove the engine air filter on a Fiat 500X: open the car door, pull up the lever to open the engine bay located at the bottom left of the dashboard and lift the front bonnet, securing it with the prop rod. Unscrew the retaining bolts of the air intake kit (located above the engine head), remove the cover of the filter box and extract the worn air filter. Insert a new filter into the designated housing (ensuring it fits snugly against the walls). Finally, reassemble the air box cover and tighten everything with the bolts. Close the front bonnet after maintenance.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat 500X
How to Remove the Air Filter on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Learn how to remove the engine air filter on one of the best-selling crossovers, the Fiat 500X: open the car door, pull up the engine compartment rel…
How to Remove the Rear Door Panel on a Fiat 500X
How to Remove the Rear Door Panel on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you can begin, open the rear door of your Fiat 500X. Start by prying off and removing the cover located above the door panel. Next, unclip and…
How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos