Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Vibration Problem of the Rear Door Handles on a Fiat 500x

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Car door

See other generations:
Video tutorial

In this video, you will see how to resolve a common issue: noisy vibrations on the Fiat 500x. The source of the noise has been identified as coming from the rear doors, mainly from the handle and partly from the tweeter located right next to it. The solution involves removing the tweeter cover and applying some rubberised double-sided tape, which dampens the vibrations and prevents movement.

The same applies to the internal door handle, but here the double-sided tape is used merely as a cushioning material, as the protective layer has not been removed.

It is easily removed as it is only held in place by pressure, and it demonstrates how the double-sided tape serves merely as a spacer, effectively reducing the vibrations that are no longer audible.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Start the Fiat 500X with a Key Without a Battery
How to Start the Fiat 500X with a Key Without a Battery
Fiat 500 (2014-2022 / 500 X) The Fiat 500X has an electronic key detection system that prevents the car from starting and moving if you do not have the key or if the key's batter…
How to Open a Stuck Boot on a Fiat 500X?
How to Open a Stuck Boot on a Fiat 500X?
Fiat 500 (2014-2022 / 500 X) On the Fiat 500X, the boot may become stuck, possibly due to a faulty control button or lock actuator. In such cases, you can still perform an emerge…
How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos