Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the hinge of the handle of the Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Handle

See other generations:
Video tutorial

In order to replace the hinge of the handle of the Fiat 500, you need to access the components that are located inside the corresponding door: to access these components, you will need to completely remove the door panel. It will be necessary to detach the lining of the internal handle to loosen the screw underneath, along with the one near the window lift switch: the panel can then be detached and the screw fixing the hinge of the handle can now be loosened.

This way, it will be possible to lift the handle externally to remove the hinge and insert the new one.


Posted on 11 January 2025 by ScegliAuto


Related tutorials

Guide to Replacing the Seat Handle Cable on the Fiat 500
Guide to Replacing the Seat Handle Cable on the Fiat 500
Fiat 500 (2007-2024 / 312) Here are the main steps to dismantle and replace the front seat handle cable on the Fiat 500. First, open the front door and start to pry on the side…
How to install the front bonnet of the Fiat 500?
How to install the front bonnet of the Fiat 500?
Fiat 500 (1957-1975 / Epoca) To install the front bonnet of the Fiat 500, insert it into the hinge just below the windscreen, in the central part. Once the bonnet is in place, se…
How to Replace the External Handle on the Fiat 500?
How to Replace the External Handle on the Fiat 500?
Fiat 500 (2007-2022 / ) To replace the external handle on the Fiat 500, start by removing the inner door panel by unscrewing the screws near the inner handle and the window …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos