|
Do it yourself
| |||
| ||||
|
To install the front bonnet of the Fiat 500, insert it into the hinge just below the windscreen, in the central part. Once the bonnet is in place, secure it to the hinge by tightening the three screws that connect the piece to the respective support. At this point, lift and lower the bonnet to check that it has been installed correctly. It is also necessary to ensure that the bonnet fits within the outline of the engine bay, checking that the ends align.
Updated on 18 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat 500
(2007-2024 /
312)
Is the windscreen of your car cracked? Follow these steps to remove and replace the windscreen of a Fiat 500. First, open the bonnet and remove the p…
Fiat 500
(2012-2023 /
500 L)
To replace the windscreen on a Fiat 500L, open the bonnet to access the bolts securing the plastic grille located just below the windscreen. Once thi…
Fiat 500
(2007-2024 /
312)
How do you replace the power battery in a Fiat 500? Open the car's door and pull up the engine compartment release lever located at the bottom left o…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.904
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
