Do it yourself
Frequently asked questions about cars and motorcycles

How to Open a Stuck Boot on a Fiat 500X?

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

On the Fiat 500X, the boot may become stuck, possibly due to a faulty control button or lock actuator. In such cases, you can still perform an emergency opening by following the simple procedure shown in this tutorial.

First, open the rear doors, then lower the backrest of the seat by operating the relevant lever. Next, go inside the boot, locate the indicated gap, and using a flathead screwdriver, manually unlock the latch.

At this point, you can open the boot and repair the faulty component.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) Note that the car radio of your Fiat 500x, the same one we see in the video, being stuck, does not necessarily have to be a cause for concern, it is …
Fiat 500 (2012-2021 / ) Below, you will see how to open the boot of the Fiat 500L in case of an emergency or if the tailgate lock is faulty. First, open the rear doors and r…
Fiat 500 (2014-2022 / 500 X) Before you can begin, open the rear door of your Fiat 500X. Start by prying off and removing the cover located above the door panel. Next, unclip and…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos