Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to remove the rear door panel of a Fiat 500X

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Door panel
Operation: How to remove the rear door panel of a Fiat 500X

Before we can begin, we will have to open the rear door of our Fiat 500X. So let's start by disengaging and removing the cover positioned above the door panel. After that, we will have to go and disengage and remove the door panel inserts. By doing so, we will have discovered the screws that secure the door panel, which we will have to unscrew and remove. At this point, using a thin but resistant tool and leveraging, we will have to unhook the internal hooks, then disconnect the relative pins, and we will have finished the disassembly.


Posted on 19 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos