Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Samsung
    3. :
  3. Sm7
    4. : 2004-2011 (EX2)

Samsung Sm7 Years 2004-2011 (EX2)

Samsung Sm7 (2004-2011 / EX2)
How to replace the battery in Samsung SM7?
In this tutorial, we can see how to replace the battery in the Samsung SM7, a very simple operation. First of all, make sure the vehicle is turned off, then …read all…
Posted on 14 April 2023 by ScegliAuto
Samsung Sm7 (2004-2011 / EX2)
How to replace the battery of the Samsung SM7 remote control?
In this tutorial we can see how to replace the battery of the Samsung SM7 remote control. For this simple and fast operation, we will not need any particular …read all…
Posted on 10 June 2023 by ScegliAuto
Samsung Sm7 (2004-2011 / EX2)
How to replace the headlight bulb of the Samsung Sm7
If it is necessary to replace the bulb in the car's right-hand front light because it is burnt out, proceed as follows: open the bonnet, behind the light there …read all…
Posted on 29 December 2022 by ScegliAuto
Samsung Sm7 (2004-2011 / EX2)
Samsung SM7 battery replacement
Let's see in this short and simple guide how to disassemble and replace the battery of the Samsung SM7. First of all, we open the bonnet of our car and start …read all…
Posted on 20 May 2022 by ScegliAuto
Battery (2) Key (1) Checks and maintenance (1) Tail light (1) Cabin air filter (1) Headlight bulb (1) Gear Shift Knob (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos