Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Seat Ibiza?

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Service warning light

The procedure for resetting the Service light on the Seat Ibiza is done by holding down the 0.0/SET button located in the center of the instrument panel: while continuing to hold down this button, it will be possible to insert the ignition key into the slot and turn it to turn on the instrument panel. Now, you will need to continue holding down the button until the icon of the wrench disappears from the instrument panel. Once the light has turned off, you can release the button and verify the reset by turning off and then turning on the instrument panel.

Posted on 8 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Seat Ibiza.
How to reset the service light on a Seat Ibiza.
Seat Ibiza (2008-2017 / 6P, 6J) Let's see in this video how to reset the service light on a Seat Ibiza: as with all vehicles in the Volkswagen group, we need to make sure that the d…
How do you reset the Seat Ibiza Service light?
How do you reset the Seat Ibiza Service light?
Seat Ibiza (2008-2017 / 6P, 6J) To reset the Seat Ibiza Service warning light, press the 0.0 / SET button located in the central part of the instrument panel. While holding it down,…
How to reset the service in the Seat Ibiza?
How to reset the service in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) In this tutorial, we can see how to reset the service indicator in the Seat Ibiza, an extremely simple and quick operation to be performed only after…

Other guides you may be interested in

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos