Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the rear seats of the Seat Ibiza

Model: Seat Ibiza 6K - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Seat

See other generations:
Video tutorial

In this short guide, we will see the main instructions that will allow us to disassemble and remove the rear seats of the Seat Ibiza. First, we open the car doors and start removing the rear bench, pulling it upwards; then we unscrew the fixing screws of the backrests that we find at the bottom, next to the safety belt attachments, as shown in the video.

At this point, we then remove the two sections of the backrests, carrying out the repair or replacement of the seats; we apply the reverse process for the reassembly of the seats!


Posted on 31 March 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Seat in a Seat Ibiza?
How to Remove the Rear Seat in a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) Removing the rear seats in a Seat Ibiza is not a complex task, and the video guide provided proves it. Here’s how to do the job: Recline the seats an…
How to Remove the Rear Seats of the Seat Ibiza?
How to Remove the Rear Seats of the Seat Ibiza?
Seat Ibiza (1993-2002 / 6K) To remove the rear seats of the Seat Ibiza, lift them from the front with your hand and position them to access the underlying pins. You will need to…
Removing the Steering Wheel from the Seat Ibiza
Removing the Steering Wheel from the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) This guide shows the steps to remove and replace the steering wheel of the Seat Ibiza, following the instructions below. First, get inside the vehicl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos