Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco St 250
Part: Engine oil

To replace the engine oil of the Sherco ST 250, you need to loosen the drain plug of the oil pan, which is located at the bottom of the vehicle: once the oil has completely drained out, collecting it in a suitable container, you can close the drain plug again. At this point, you can top up the oil: you will need to insert the necessary amount of engine oil through the vent on the right side of the motorcycle. Once the top-up is complete, you can close the cap and check that everything is functioning properly.

Posted on 15 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the seat of the Sherco ST 250?
How do you replace the seat of the Sherco ST 250?
St 250 In order to replace the seat of the Sherco ST 250, you need to pry with an object such as a screwdriver on the two side parts of the seat itself, so …
How do you replace the water pump on the Sherco ST 250?
How do you replace the water pump on the Sherco ST 250?
St 250 In order to replace the water pump of the Sherco ST 250, you need to loosen the screws that secure the transmission cover, located on the right side …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos