Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the power button of the Sherco SE 300?

Model: Sherco Se 300
Part: Checks and maintenance

Video tutorial

In order to replace the power button of the Sherco SE 300, you need to loosen the screws that secure the button to its housing so that it can be detached: this button will be located on the right side of the handlebars, immediately to the left of the throttle grip.

Once the support screws have been loosened, it will be possible to disconnect the connector and completely remove the power button: the new replacement part can then be positioned on the right side of the handlebars and subsequently connected to the connector, checking for proper functioning.


Posted on 27 January 2025 by ScegliAuto


Related tutorials

How do you replace the clutch of the Sherco SE 300?
How do you replace the clutch of the Sherco SE 300?
Se 300 In order to replace the clutch of the Sherco SE 300, you need to loosen the screws that secure the side clutch cover panel: once the fixing screws of…
How to Replace the Fuel Hose on the Sherco SE 300?
How to Replace the Fuel Hose on the Sherco SE 300?
Se 300 To replace the fuel hose on the Sherco SE 300, insert the key into the designated lock located at the rear of the seat: once the key is inserted, tur…
How to Replace the Carburettor on the 2020 Sherco SE 300?
How to Replace the Carburettor on the 2020 Sherco SE 300?
Se 300 In this video tutorial, we will see the main steps to disassemble and replace the carburettor on the 2020 Sherco SE 300 enduro bike. First, disconnec…

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos