Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Sherco 250
Part: Clutch

It will be possible to replace the clutch of the Sherco 250 by loosening the screws that secure the cover casing located on the right side: once the casing has been removed, it will be possible to loosen the screws underneath that secure the discs that make up the clutch. It will now be possible to remove it completely from its seat in order to insert the new replacement parts: these can now be fixed in place by tightening them with bolts. Finally, everything can be covered with the corresponding casing to verify that everything is functioning correctly.

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Flywheel on a Sherco 250?
How to Replace the Flywheel on a Sherco 250?
Sherco 250 To replace the flywheel on a Sherco 250, you need to loosen the screws securing the cover on the left side of the bike, allowing it to be removed and…
How to Replace the Cylinder Head Gasket on a Sherco 250
How to Replace the Cylinder Head Gasket on a Sherco 250
Sherco 250 To replace the cylinder head gasket on the Sherco 250, loosen the bolts securing the engine cylinder to its housing at the top of the engine block. Y…
How to Replace the Coolant in a Sherco 250
How to Replace the Coolant in a Sherco 250
Sherco 250 To replace the coolant in the Sherco 250, first, remove the radiator cap located at the front of the bike. Once the radiator cap is open, you can the…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos