Do it yourself
| ||||
|
Model: Sherco Sherco 250
In order to replace the flywheel of the Sherco 250 it is necessary to loosen the screws that fix the casing positioned on the left side of the bike, so that this can be removed giving access to the components in its underlying part. Then it will be necessary to loosen the bolts that secure the clutch, which can be removed to give access to the flywheel located under it: by loosening the central nut that joins the flywheel to the crankshaft it will be possible to remove it, replacing it with a new one. After replacement, all previously removed components can be re-assembled.
Posted on 23 October 2022 by ScegliAuto
|
Replace the muffler silencer of the Benelli Trk 502In today's video tutorial we will see the main instructions that will allow us to disassemble the silencer or the entire muffler of the Benelli Trk 502. First we put our bike on the central stand and start unscrewing the fixing screws of the silencer bracket; we remove the spring to remove the latter from the exhaust manifold, as shown in the video. At this point we are going to install the new muffler silencer, fixing it correctly on the brackets; to replace the manifold too, just unscrew the nuts fixed on the cylinder, following the video to the end! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |