Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for the Sherco SEF 300

Model: Sherco Sef 300
Part: Engine oil

Video tutorial

Here are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sherco SEF 300 enduro motorcycle. First, place the motorcycle on the stand and begin by removing the lower engine guard; then unscrew the oil drain bolt located on the sump, allowing the oil to drain into a container for about ten minutes.

At this point, unscrew the screws of the oil filter cover, removing and replacing the cartridge with the new one; reassemble the cover and pour in the engine oil, ensuring it meets the correct specifications and filling to the maximum level.


Posted on 18 June 2026 by ScegliAuto


Related tutorials

How do you replace the oil filter of the Sherco SEF 300?
How do you replace the oil filter of the Sherco SEF 300?
Sef 300 In order to replace the oil filter of the Sherco SEF 300, you will need to remove the corresponding cover located on the left side of the motorcycle,…
How to change the engine oil on the Sherco SEF 300?
How to change the engine oil on the Sherco SEF 300?
Sef 300 You can change the engine oil on the Sherco SEF 300 by loosening the drain plug located at the central lower part of the bike: once this plug is remo…
How to Change the Engine Oil on the Sherco SEF 300
How to Change the Engine Oil on the Sherco SEF 300
Sef 300 You can change the engine oil on the Sherco SEF 300 by loosening the screws that secure the skid plate located at the central bottom of the bike. Onc…

How to Replace the Headlight Bulb on the MV Agusta Brutale 800RR?

To replace the headlight on the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical unit: these screws will be located on the sides and underneath the headlight. Once the screws are removed, you can extract the optical unit from its housing and disconnect the connector located inside; at this point, you can remove the bulb inside so that you can insert the new one. The headlight can now be secured with the appropriate screws to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos