Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. : Ser 250
In this video, you will find instructions on how to remove the starter gear of a Sherco SER 250 and 300. First, unscrew the screws of the starter cover and remove the stator cover; then unscrew the fixing screws of the gear using a socket spanner (remove carefully). At this point, you can remove the other gears present on the cover; for reassembly, it is necessary to lubricate and grease the protruding parts well before fitting the cover back, securing it with the screws.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the starter motor from the Sherco SER 250?
How to remove the starter motor from the Sherco SER 250?
Ser 250 To remove the starter motor from the Sherco SER 250, first remove it from its housing by unscrewing the screws that secure it and disconnecting the c…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos