Do it yourself
Frequently asked questions about cars and motorcycles
Before you can start, sit on the seat of your Sherco Se-R 125. Begin by inserting and turning the key in the ignition switch, activating the instrument panel. Next, press the lower red button to activate the power to the spark plugs and the electrical system. At this point, press and hold the starter button located on the right-hand switch block until the engine starts, while giving it a little throttle by twisting the throttle grip. Once the engine has started, release the starter button, and you will have completed the procedure.

Updated on 17 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Se R 125 .. refill the transmission oil of the Sherco SE-R 125 enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under.. …
Se R 125 Today, we will see how to perform the routine maintenance service by changing the engine oil and oil filter on the Sherco SE 125 R two-stroke enduro …
Se R 125 .. To replace the air filter on a Sherco SE-R 125, loosen the screws that secure the seat to its housing. Once removed, you can access the components.. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos