Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will see how to perform the routine maintenance service by changing the engine oil and oil filter on the Sherco SE 125 R two-stroke enduro bike. First, place the bike on its stand and start by unscrewing the oil drain bolt located under the engine; let it drain into a container for about ten minutes. Next, unscrew the oil filler cap and top up with the correct new oil; finally, check the oil level by following the video to the end!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil of the Sherco SE-R 125
How to Change the Transmission Oil of the Sherco SE-R 125
Se R 125 These brief and simple steps will allow you to drain and subsequently refill the transmission oil of the Sherco SE-R 125 enduro bike. First, place th…
How to Start a Sherco Se-R 125
Se R 125 Before you can start, sit on the seat of your Sherco Se-R 125. Begin by inserting and turning the key in the ignition switch, activating the instrume…
How to Replace the Air Filter on a Sherco SE-R 125
How to Replace the Air Filter on a Sherco SE-R 125
Se R 125 To replace the air filter on a Sherco SE-R 125, loosen the screws that secure the seat to its housing. Once removed, you can access the components un…

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos