Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter on a Sherco SE-R 125

Model: Sherco Se R 125
Part: Air filter

Video tutorial

To replace the air filter on a Sherco SE-R 125, loosen the screws that secure the seat to its housing. Once removed, you can access the components underneath.

Here, you will find the air filter box, which needs to be opened by loosening the screws that secure the cover. The filter inside can then be extracted and replaced with a new spare part.

After replacement, insert the new part, close the box, and reinstall the seat that was previously removed.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Se R 125 Today, we will see how to perform the routine maintenance service by changing the engine oil and oil filter on the Sherco SE 125 R two-stroke enduro …
Se R 125 .. you can start, sit on the seat of your Sherco Se-R 125. Begin by inserting and turning the key in the ignition switch, activating the instrument panel... …
Se R 125 .. refill the transmission oil of the Sherco SE-R 125 enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under.. …

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos