Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Se 300
Part: Engine oil

In this video tutorial, learn how to change the engine oil, performing the regular maintenance service, on a Sherco SE 300 enduro bike. First, warm up the engine for a few minutes; then remove the oil drain bolt located underneath the engine using a socket spanner, allowing the oil to drain into a container for about ten minutes. Next, clean the magnet of any metallic residues found on the tip of the oil cap; then insert the new engine oil of the correct type (in this case, a 10W40 off-road oil)!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Sherco SE 300
How to Change the Engine Oil on the Sherco SE 300
Se 300 You can perform the engine oil change on the Sherco SE 300 by loosening the drain plug on the oil sump, located at the central lower part of the vehi…
How to Replace the Transmission Oil of the Sherco SE 300
How to Replace the Transmission Oil of the Sherco SE 300
Se 300 Today, follow the procedure for replacing the transmission oil in the Sherco SE 300 enduro bike in simple steps. First, drain the gearbox oil by unsc…
How do you replace the engine oil of the Sherco SE 300?
How do you replace the engine oil of the Sherco SE 300?
Se 300 To replace the motor oil of the Sherco SE 300, you need to loosen the drain plug located in the central lower part of the motorcycle: once it has bee…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos