Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Discs on a Sherco ST 290 2011

Model: Sherco St 290
Part: Clutch

Video tutorial

In this video tutorial, you will see how to dismantle and replace the clutch discs on a Sherco ST 290 motorcycle in simple steps. First, position your motorcycle on a stand and remove the right side cover, near the clutch; to do this, unscrew the fixing screws using a socket spanner.

Next, unscrew the screws of the clutch pack, removing the metal disc to take out the cork discs; then, replace the discs and springs of the clutch with the correct parts, applying the reverse procedure of disassembly!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Dismantle the Forks on Sherco SE - ST 290 Trial (2004)
How to Dismantle the Forks on Sherco SE - ST 290 Trial (2004)
St 290 In this video, you will learn how to dismantle the front forks on various Sherco models in Trial version, such as the SE and ST 290. First, unscrew t…
How to Replace the Sprocket on the Sherco ST 290?
How to Replace the Sprocket on the Sherco ST 290?
St 290 To replace the sprocket on the Sherco ST 290, loosen the screws securing the cover on the left side of the bike. Once removed, locate the underlying …
How to Replace the Clutch on a Sherco ST 290?
How to Replace the Clutch on a Sherco ST 290?
St 290 To replace the clutch on a Sherco ST 290, you need to loosen the screws securing the cover located on the right side of the bike, just below the exha…

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos