Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the cylinder head on the Sherco SE 300, you need to access the components located at the top of the engine to remove them and gain access to the cylinder: once all these components are removed, you can disconnect the coil from the spark plug at the top of the cylinder, then remove the spark plug itself. This will allow you to detach the cylinder head and replace it with a new spare part; after replacement, reassemble all previously removed components.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Master Cylinder Cover on Sherco SE 250-300 4T
Removing the Master Cylinder Cover on Sherco SE 250-300 4T
Se 300 Watch this video to learn how to remove the master cylinder cover of the clutch on a Sherco SE 250 or 300 4-Stroke enduro bike. First, position your …
How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
Se 300 To replace the clutch cylinder protection panel on the Sherco SE 300, loosen the bolts securing the panel located directly above the sprocket. Once t…
How to Replace the Clutch on a Sherco SE 300
How to Replace the Clutch on a Sherco SE 300
Se 300 To replace the clutch on the Sherco SE 300, loosen the bolts securing the cover on the right side of the bike, just below the exhaust. Once the bolts…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos