Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Se 300
Part: Headlight

To replace the front headlight on a Sherco SE 300, loosen the screws that secure the front fairing of the bike to its housing. These fixing screws are located on the inside, just below the handlebars. Once these two screws are loosened, you can detach the front fairing and proceed to loosen the internal screws that secure the headlight unit. This unit must also be disconnected from its connectors so that a new replacement part can be inserted into its housing, ensuring everything functions correctly.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
How to Replace the Clutch Cylinder Protection Panel on a Sherco SE 300?
Se 300 To replace the clutch cylinder protection panel on the Sherco SE 300, loosen the bolts securing the panel located directly above the sprocket. Once t…
How to remove the water pump on Sherco SE 300
How to remove the water pump on Sherco SE 300
Se 300 In this video, you will see how to remove the water pump on a Sherco SE 300 enduro bike in simple and quick steps. First, remove the coolant hose by …
How to Replace the Carburettor on the 2020 Sherco SE 300?
How to Replace the Carburettor on the 2020 Sherco SE 300?
Se 300 In this video tutorial, we will see the main steps to disassemble and replace the carburettor on the 2020 Sherco SE 300 enduro bike. First, disconnec…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos