Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Fabia
  6. : Roof rack bars

Skoda Fabia - Roof rack bars

Roof Rack Bars Skoda Fabia (2007-2014 / mark 2, 5 j)

Skoda Fabia (2007-2014 / Mark2, 5J)
How to Install Roof Bars on Skoda Fabia

These brief and simple steps will show you how to install the roof bars on the Skoda Fabia, following the instructions below. First, obtain the roof bar kit …Read all…
Posted on 18 March 2026 by ScegliAuto

Airbag (5) Alternator (1) Speaker (1) Antenna (2) Car stereo (1) Roof rack bars (1) Battery (12) Air vents (1) Bushings (4) Control arm (2) Spark plugs (4) Body (4) Glove compartment (3) Key (40) Timing belt (8) V-belt (1) Air conditioner (1) Onboard computer (11) Checks and maintenance (28) Throttle body (1) Dashboard (6) Shifter boot (1) Bearing (1) Brake rotors (1) Rear bench seat (1) Headlight (8) Tail light (10) Fog lights (4) Air filter (2) Cabin air filter (6) Fuel filter (3) Diesel fuel filter (3) Oil filter (1) Parking brake (3) Grille (1) Window switch (1) Light bulb (4) Side marker bulb (1) Headlight bulb (20) Tail light bulb (5) (1) Handle (7) Transmission fluid (1) Engine oil (6) Clock (20) Door trim panel (33) Front bumper (2) Rear bumper (2) Brake pads (2) Shift knob (3) Fuel pump (1) Car door (1) Power window switch (1) Instrument cluster (1) Radiator (3) Heater core (2) Fuse box (76) Seat (10) Crankshaft position sensor (1) Door lock (5) Suspension system (1) Side mirror (3) Warning light – error code (22) (28) Tire pressure warning light (7) Service warning light (176) Engine mount (1) Fuel cap (1) Windshield wipers (5) Center console tunnel (2) Blower motor (1) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos