Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : V-belt

Skoda Fabia - V-belt

Skoda Fabia (1999-2007 / Mark1, 6Y)
Replacing the service belt on a Skoda Fabia
Let's get ready to replace the service belt on a Skoda Fabia. We lift the car on a column bridge, remove the lower engine cover panel. Once these operations …read all…
Posted on 24 November 2023 by ScegliAuto
Airbags (1) Alternator (1) Loudspeaker (1) Antenna (1) Car stereo (2) Battery (11) Bushings (4) Arm (1) Spark plugs (4) Glove box (1) Key (21) Timing belt (4) V-belt (1) Air conditioning (1) -board computer (7) Checks and maintenance (83) Dashboard (3) Bearing (1) Brake discs (1) Headlight (5) Tail light (5) Fog lights (2) Air filter (1) Cabin air filter (4) Petrol filter (3) Diesel filter (2) Oil filter (1) Window lift switch (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (10) Rear light bulb (2) Handle (2) Gear oil (1) Engine oil (2) Door panel (22) Front bumper (2) Brake pads (2) Tires (1) Gear Shift Knob (2) Fuel pump (1) Door (1) Instrument cluster (19) Radiator (2) Passenger compartment heating radiator (2) Fuse box (31) Seat (9) Lock (6) Suspensions (1) Outside rearview mirror (3) Engine mount (1) Windscreen wipers (4) Central tunnel (1) Side window (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos