Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Karoq
    4. : Instrument cluster

Skoda Karoq - Instrument cluster

Skoda Karoq (2017-2024 / MK 1)
How to reset the oil light on the 2022 Skoda Karoq
If you own the new Skoda Karoq (year 2022) and are wondering what steps to take to manually reset the engine oil light, then all you have to do is read the …read all…
Posted on 21 March 2024 by ScegliAuto
Skoda Karoq (2017-2024 / MK 1)
To reset the maintenance light on the Skoda Karoq 2022.
In this new guide, we will discover together how to correctly perform the manual reset of the maintenance light on the display of the instrument panel of your …read all…
Posted on 25 November 2023 by ScegliAuto
Skoda Karoq (2017-2024 / MK 1)
How to reset the AdBlue light on Skoda Karoq
If we need to reset the blue light that comes on on the control panel and stays on even after topping up the additive, we can use a diagnostic system that we …read all…
Posted on 9 April 2023 by ScegliAuto
Skoda Karoq (2017-2024 / MK 1)
How to reset the Skoda Karoq service
In today's video we see how to reset the parameter relating to the expiration of the service interval in the Skoda Karoq. First of all, remember to carry out …read all…
Posted on 26 November 2022 by ScegliAuto
Battery (1) Key (5) Checks and maintenance (9) Air filter (1) Engine oil (1) Door panel (1) Tires (1) Instrument cluster (4) Fuse box (3) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos