Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Kodiaq
    4. : Tire pressure warning light

Skoda Kodiaq - Tire pressure warning light

Tire Pressure Warning Light Skoda Kodiaq (2017-2023 / mk 1)

Skoda Kodiaq (2017-2023 / MK 1)
How do you reset the tire pressure warning light on the Škoda Kodiaq?
The tire pressure warning light that appears on the Škoda Kodiaq's instrument panel can be reset by first inflating the tires, bringing them back to the …Read all…
Posted on 4 September 2024 by ScegliAuto
Skoda Kodiaq (2017-2023 / MK 1)
How to reset the tyre pressure warning light on the Škoda Kodiaq?
To reset the tyre pressure warning light on the Škoda Kodiaq, first inflate the tyres to the correct pressure value, which is indicated on the sticker located …Read all…
Posted on 16 September 2026 by ScegliAuto
Skoda Kodiaq (2017-2023 / MK 1)
How to reset the tyre pressure warning light on the Škoda Kodiaq?
To reset the tyre pressure warning light on the Škoda Kodiaq, first inflate the tyres to the correct pressure value: this value is indicated on the sticker …Read all…
Posted on 26 July 2026 by ScegliAuto
Battery (1) Body (1) Glove compartment (1) Key (12) Onboard computer (2) Checks and maintenance (5) Dashboard (1) Air filter (2) Cabin air filter (4) Clock (2) Door trim panel (1) Car door (1) Fuse box (19) Seat (2) AdBlue warning light (1) Warning light – error code (3) (9) Tire pressure warning light (3) Service warning light (36)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos