Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Kodiaq
  6. : How to reset the tire pressure sensor of a Skoda Kodiaq?

Skoda Kodiaq - Video tutorial

Model: Skoda Kodiaq MK 1 - Years 2017-2023
Part: -board computer
Operation: How to reset the tire pressure sensor of a Skoda Kodiaq?

To reset the tire pressure warning light on our Skoda Kodiaq, follow these steps. Turn on the car and wait for all the dashboard checks to complete, including the tire pressure warning light turning on. Then, using the buttons on the central dashboard, access the settings menu and look for the tire submenu. Follow the procedure indicated by the onboard computer for the reset. After completing the indicated procedure, turn off the car and wait a few seconds before turning it back on. Check if the tire pressure warning light has turned off to confirm that the reset has been successfully performed on our Skoda Kodiaq.


Posted on 9 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos