Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear seats of the Škoda Yeti?

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Seat

Video tutorial

In order to remove the rear seats of the Škoda Yeti, you need to lower the lever located in the front part of the seat, between the seat and the backrest: once this lever has been lowered, the backrest can also be fully lowered. Then you will have access to the lever located in the back of the seat, which also needs to be pulled: this way the entire seat can be detached from its base and the same process can be repeated for the other seats.

Then you will need to insert the new replacement parts and fix them properly.


Posted on 13 September 2025 by ScegliAuto


Related tutorials

How to Replace the Radio in a Škoda Yeti?
How to Replace the Radio in a Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) You can replace the radio in a Škoda Yeti by using a tool to pry off the trim panel surrounding the radio: once this panel is removed, you can locate…
How do you reset the AdBlue light on the Škoda Yeti?
How do you reset the AdBlue light on the Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) To reset the AdBlue warning light on the Škoda Yeti, you will need to refill it by inserting the necessary amount of fluid from the vent located on t…
How to Reset the AdBlue Warning Light on the Škoda Yeti?
How to Reset the AdBlue Warning Light on the Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) When the AdBlue warning light appears on the instrument cluster of the Škoda Yeti, it means that the amount of additive liquid in the respective tank…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos