Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Škoda Yeti?

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

Video tutorial

You can replace the radio in a Škoda Yeti by using a tool to pry off the trim panel surrounding the radio: once this panel is removed, you can locate the screws underneath that secure the device in place. These screws must be loosened to extract the radio from its housing: the connectors at the back must be disconnected to connect the new radio.

The new radio can then be inserted into its housing, secured with the appropriate screws, and covered with the panel.


Posted on 22 September 2026 by ScegliAuto


Related tutorials

How to replace the door panel on a Škoda Yeti?
How to replace the door panel on a Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) To replace the door panel on a Škoda Yeti, loosen the screws located under the internal handle, next to the door actuator, and at the bottom of the p…
How to Reset the AdBlue Warning Light on the Škoda Yeti?
How to Reset the AdBlue Warning Light on the Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) When the AdBlue warning light appears on the instrument cluster of the Škoda Yeti, it means that the amount of additive liquid in the respective tank…
How to Reset the Service Light on a Škoda Yeti?
How to Reset the Service Light on a Škoda Yeti?
Skoda Yeti (2009-2017 / MK 1) To reset the Service light on a Škoda Yeti, press and hold the 0.0/SET button located on the right side of the instrument cluster. While holding it, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos