Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Yeti
    4. : How do you reset the AdBlue warning light on the Škoda Yeti?

Skoda Yeti - Video tutorial

Model: Skoda Yeti MK 1 - Years 2009-2017
Part: Checks and maintenance
Operation: How do you reset the AdBlue warning light on the Škoda Yeti?

When the AdBlue warning light appears on the instrument panel of the Škoda Yeti, it means that the quantity of additional liquid in the corresponding tank is almost depleted: it will therefore be possible to completely turn off the warning light by performing a refill. To do this, you will need to open the rear door and then remove the lining located at the base of the trunk: in the upper right part compared to the spare wheel, it will be possible to locate the cap to be removed in order to insert the necessary amount of liquid into the tank.


Posted on 19 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos