Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Škoda Yeti?

Model: Skoda Yeti MK 1 - Years 2009-2017
Part: Service warning light

To reset the Service light on a Škoda Yeti, press and hold the 0.0/SET button located on the right side of the instrument cluster. While holding it, insert the ignition key into the barrel and turn it to switch on the instrument cluster. Once it is on, release the button and press it again briefly. After this operation, the Service light will be reset. You can confirm the reset by turning the instrument cluster off and then back on.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Yeti (2009-2017 / MK 1) The reset of the Service light of the Škoda Yeti is done by going inside the cabin and acting with the instrument panel off. First, you will need to …
Skoda Yeti (2009-2017 / MK 1) To reset the Service light on the Škoda Yeti, go inside the cabin and operate with the instrument cluster off. First, press and hold the button for r…
Skoda Yeti (2009-2017 / MK 1) By entering the cabin and acting with the instrument panel off, you can reset the Service light of the Škoda Yeti. First of all, you will need to hol…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos