|
Do it yourself
| |||
| ||||
How to reset the service light on a Skoda Enyaq
Model: Skoda Enyaq Iv
MK 1
- Years:
2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
Let's see how to reset the service light on a Skoda Enyaq: there are two systems, the one described in the video with the diagnostic tool intended for expert users, for which you need an OBD11 or a VCDS; turn on the car and connect to the EOBD port; select control unit 5F, enter "adaptations", look for the correct channel and then modify the values: for "time since last service" set the value to 0; for "distance since last service" set the value to 0. Save and check that the light is off. However, there is a simple and safe system that can be done from the touchscreen and is accessible to everyone, which we describe below: on the multimedia screen touch the "vehicle" icon; from there go to "settings" which will take us to "maintenance". Here we will find "reset service interval" where you just have to follow the on-screen instructions that will end with a "are you sure you want to reset the service data?" answer "yes" and we are done.
Posted on 14 October 2025 by ScegliAuto
Related tutorials
Skoda Enyaq Iv
(2020-2026 /
MK 1)
In this tutorial, we can see how to reset the tire warning light on the Skoda Enyaq, an extremely simple and quick operation to be carried out only o…
Skoda Enyaq Iv
(2020-2026 /
MK 1)
In this tutorial, we can see how to reset the tire pressure warning light in the Skoda Enyaq, an extremely simple and quick operation, to be carried …
Skoda Enyaq Iv
(2020-2026 /
MK 1)
In this tutorial we can see how to reset the on-board computer in the Skoda Enyaq, an extremely simple and fast operation, to be carried out for exam…
Other guides you may be interested in |
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
