Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on the Skoda Yeti?

Model: Skoda Yeti MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

This video is currently unavailable

In this tutorial, we will see how to reset the tire warning light on the Skoda Yeti, an operation that is extremely simple and quick, to be done only once the correct pressure for each tire has been restored according to the instructions in the manual.

First, let's go inside the cabin, then insert the key and turn on the instrument panel.

Next, locate the "SET" button located in the lower area of the center console, press and hold it until the warning light disappears from the panel, and complete the procedure by restarting the vehicle.


Posted on 1 December 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light in the Skoda Yeti?
How to Reset the Tyre Pressure Light in the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) In this tutorial, see how to reset the tyre pressure light in the Skoda Yeti, a very simple and quick operation to perform only once the correct pres…
How to reset the tire pressure warning light on the Skoda Yeti?
How to reset the tire pressure warning light on the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) In this tutorial we can see how to reset the tire pressure warning light in the Skoda Yeti, an extremely simple and quick operation, to be done only …
How to reset the tyre warning light on the Skoda Yeti?
How to reset the tyre warning light on the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) Resetting the tyre warning light on the Skoda Yeti, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos