Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How do i replace the wiper blades on the Å koda Octavia?

Model: Skoda Octavia 1Z, MK 2 - Years 2004-2012
Part: Windscreen wipers

To be able to replace the wiper blades on the Å koda Octavia, the wipers must be operated from inside the car and left standing upright. Subsequently, it will be necessary to lift them by pulling them outwards and it will be necessary to rotate the blade 90 ° with respect to the wiper arm. In this way it can be easily removed and replaced with a new spare part. Once the new blade has been installed, it will be possible to put it back in position to lower the blade, repositioning it in contact with the windshield. After replacement, it will be possible to check the correct functioning of the components.


Posted on 8 March 2024 by ScegliAuto



How do you replace the heat exchanger on the Å koda Octavia?
Skoda Octavia (2012-2019 / MK 3, 5E) In order to replace the heat exchanger of the Å koda Octavia, the entire central panel must be disassembled by removing the special plastic covers. U
How do I remove the door panel on Å koda Octavia?
Skoda Octavia (2004-2012 / 1Z, MK 2) The door panel removal operation on the Å koda Octavia is carried out by lifting the window regulator button panel, so that the three screws below ca
How do I replace the battery in the remote control of the Å koda Octavia?
Skoda Octavia (2012-2019 / MK 3, 5E) The battery replacement of the Å koda Octavia can be done by lifting the emergency key by pressing the special button on the top of the remote contro

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos