Do it yourself
Frequently asked questions about cars and motorcycles

Service Reset on Skoda Fabia

Model: Skoda Fabia Mark3, NJ - Years 2014-2021
Part: Warning light – error code

After changing the engine oil on your Skoda Fabia third generation, produced from 2014 to 2019, you will also need to reset the service light. This is a very simple operation that you can perform independently. To reset, start by pressing and holding the "0.0/SET" button located on the speedometer, then turn on the instrument cluster without starting the engine. Once done, a reset request will appear on the information display, so release the button and press it again briefly to confirm and complete the service light reset.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Fabia (2007-2014 / Mark2, 5J) Below are the instructions on how to reset the maintenance warning light on the Skoda Fabia. First, get into the vehicle and turn on the ignition. Th…
Skoda Fabia (2014-2021 / Mark3, NJ) If you want to carry out the procedure through which you can reset the service light of your Skoda Fabia by yourself, all you have to do is follow th…
Skoda Fabia (2021-2026 / Mark4) Below we will see the information that will allow us to reset the service light of the Skoda Fabia. First of all, we get on board the car and start t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos