Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Fabia
  6. : How to disassemble the door panel of the 2016 Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia NJ, Mark3 - Years 2014-2021
Part: Door panel
Operation: How to disassemble the door panel of the 2016 Skoda Fabia

The steps to remove the door panel of a 2016 Skoda Fabia are short and quick, and can be done independently. To remove the panel, we need to open the door in question and proceed with removing the central part of the handle by using a flat-head screwdriver to pry it off. Disconnect the handle connector and unscrew the screw. Remove the top part of the panel and then dismantle the inner handle with the window opening and closing switch. Unscrew the screws at the bottom of the panel and remove it. Finish the removal by disconnecting the connector.


Posted on 30 March 2024 by ScegliAuto



How to disassemble the rear door panel of the Skoda Fabia.
Skoda Fabia (2007-2014 / 5J, Mark2) Today's guide will illustrate the procedure for disassembling and replacing the rear door panel of the Skoda Fabia. First, we open the door (the disa
How to disassemble the door panel of a Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) To remove the door panel of the Skoda Fabia, start by removing the interior door handle, usually fixed with screws or clips. Next, remove all visible
How to remove the lock on Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Is the door lock damaged? Let's see how the door of the Skoda Fabia is removed. We disassemble the cover of the internal handle, unscrew the screws p

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos